Before every rebuild, I use ' git clean -xdf ' I think it should recover the original state before configured. Correct me if this is not the case.
On Fri, Jul 31, 2015 at 1:31 PM, John Peterson <jwpeter...@gmail.com> wrote: > > > On Fri, Jul 31, 2015 at 11:15 AM, Xujun Zhao <xzha...@gmail.com> wrote: > >> the HDF5 is disabled, but NetCDF is still enabled during config. See the >> attached log files. >> That's strange! >> > > Actually, I think the important bit is this line: > > > configure:37067: result: defining -DNOT_NETCDF4 for our Exodus build > > which I believe means that Exodus will not use NetCDF4, despite what our > netcdf.m4 test says... > > Are you sure that the netcdf/exodus in contrib actually got rebuilt after > you reconfigured? Just to be sure, you might try blowing away your build > directory and configuring from scratch just to ensure there is nothing from > the HDF5 build left behind. > > If this fresh build approach still doesn't work, the next step is to run > this example through the debugger to get more details on the segfault: > > cd build/examples/systems_of_equations/systems_of_equations_ex1 > libtool --mode=execute lldb ./example-dbg > > -- > John > ------------------------------------------------------------------------------ _______________________________________________ Libmesh-users mailing list Libmesh-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/libmesh-users
