Ok, well that was a big improvement.
Cloned/boostrapped/configured/built/installed openocd 0.9.0 and use the
stm32l0discovery.cfg board script and it found the board and worked. Now
when I get home from work I will swap back out to the nucleo board and see
if it works too (I think it should). Thanks for the tip Karl, that was the
primary issue (software was out of date) not sure what fixes it.
There are still some error warnings when running like this:
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x0800017c msp: 0x20002000
STM32L: Enabling HSI
Runtime Error: /usr/local/share/openocd/scripts/target/stm32l.cfg:89:
in procedure 'reset'
in procedure 'ocd_bouncer'
in procedure 'ocd_process_reset'
in procedure 'ocd_process_reset_inner' called at file
"embedded:startup.tcl", line 246
in procedure 'stm32l.cpu' called at file "embedded:startup.tcl", line 368
in procedure 'ocd_bouncer'
in procedure 'stm32l_enable_HSI'
in procedure 'mww' called at file
"/usr/local/share/openocd/scripts/target/stm32l.cfg", line 89
Warn : couldn't use loader, falling back to page memory writes
adapter speed: 300 kHz
But at least I can load code and run it from gdb which is a great
improvement!
--Chuck
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
libopencm3-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/libopencm3-devel
