libopencm3-devel  

Messages by Date

• 2023/01/10 Re: [libopencm3-devel] SD card with STM32F1 Chuck Guzis via libopencm3-devel
• 2023/01/10 Re: [libopencm3-devel] SD card with STM32F1 Amitesh Singh
• 2023/01/03 Re: [libopencm3-devel] SD card with STM32F1 Bob Dunlop
• 2023/01/02 Re: [libopencm3-devel] SD card with STM32F1 Amitesh Singh
• 2023/01/02 [libopencm3-devel] SD card with STM32F1 Damien Maguire
• 2022/09/30 Re: [libopencm3-devel] Audio Function Eléaz van der Toorn
• 2022/09/27 Re: [libopencm3-devel] Audio Function Stephen Holdaway
• 2022/09/27 [libopencm3-devel] Audio Function Eléaz van der Toorn
• 2021/10/21 [libopencm3-devel] SAMD support? Chris Chronopoulos
• 2021/09/22 Re: [libopencm3-devel] GD32VF103 support (RISC-V) #1234 Karl Palsson
• 2021/09/22 [libopencm3-devel] GD32VF103 support (RISC-V) #1234 Lubomir Rintel
• 2021/05/26 Re: [libopencm3-devel] STM32 F1 -> F3 development Karl Palsson
• 2021/05/26 Re: [libopencm3-devel] STM32 F1 -> F3 development Uwe Bonnes
• 2021/05/26 [libopencm3-devel] STM32 F1 -> F3 development Rico
• 2021/01/16 Re: [libopencm3-devel] Exampels for STM32F401RE karl
• 2021/01/16 [libopencm3-devel] Exampels for STM32F401RE G Hasse
• 2020/09/25 [libopencm3-devel] i2c v2 omission and possible fix Valentijn Sessink
• 2020/08/18 Re: [libopencm3-devel] Suitability of libopencm3 for Cortex-M7 MCUs? Karl Palsson
• 2020/08/18 Re: [libopencm3-devel] Suitability of libopencm3 for Cortex-M7 MCUs? Chuck Guzis via libopencm3-devel
• 2020/08/18 Re: [libopencm3-devel] Suitability of libopencm3 for Cortex-M7 MCUs? Karl Palsson
• 2020/08/17 [libopencm3-devel] Suitability of libopencm3 for Cortex-M7 MCUs? Chuck Guzis via libopencm3-devel
• 2020/08/13 Re: [libopencm3-devel] Question of STM32 F1 DFU example code Karl Palsson
• 2020/08/09 Re: [libopencm3-devel] I2C on STM32L1? 徐耀坚
• 2020/08/02 Re: [libopencm3-devel] I2C on STM32L1? Chris Chronopoulos
• 2020/08/02 Re: [libopencm3-devel] I2C on STM32L1? Karl Palsson
• 2020/08/02 Re: [libopencm3-devel] I2C on STM32L1? Chris Chronopoulos
• 2020/08/01 Re: [libopencm3-devel] I2C on STM32L1? Chris Chronopoulos
• 2020/08/01 [libopencm3-devel] I2C on STM32L1? Chris Chronopoulos
• 2020/07/19 [libopencm3-devel] Question of STM32 F1 DFU example code Mats Webjörn/WIKAB
• 2018/10/09 Re: [libopencm3-devel] [PATCH] stm32: iwdg: Convert iwdg_set_period_ms to iwdg_set_period_ticks Filip Moc
• 2018/10/09 Re: [libopencm3-devel] [PATCH] stm32: Reimplement iwdg_set_period_ms Filip Moc
• 2018/10/09 [libopencm3-devel] [PATCH] stm32: iwdg: Convert iwdg_set_period_ms to iwdg_set_period_ticks Filip Moc
• 2018/10/09 Re: [libopencm3-devel] [PATCH] stm32: iwdg: Convert iwdg_set_period_ms to iwdg_set_period_ticks Karl Palsson
• 2018/10/09 Re: [libopencm3-devel] [PATCH] stm32: Reimplement iwdg_set_period_ms Karl Palsson
• 2018/10/07 Re: [libopencm3-devel] [PATCH] stm32: Reimplement iwdg_set_period_ms Karl Palsson
• 2018/09/11 [libopencm3-devel] [PATCH] stm32: Reimplement iwdg_set_period_ms Filip Moc
• 2018/08/19 [libopencm3-devel] USB MS bug for STM32 TS-Labs
• 2018/01/17 [libopencm3-devel] Error in rcc_wait_for_sysclk_status don
• 2018/01/01 [libopencm3-devel] timer_ic_ function missing? Warren Gay
• 2017/12/27 [libopencm3-devel] Template for libopencm3 project based on meson build system. Amitesh Singh
• 2017/12/21 Re: [libopencm3-devel] Current support status for STM32F4 Chuck Guzis via libopencm3-devel
• 2017/12/21 Re: [libopencm3-devel] Current support status for STM32F4 Karl Palsson
• 2017/12/20 [libopencm3-devel] Current support status for STM32F4 Chuck Guzis via libopencm3-devel
• 2017/12/02 Re: [libopencm3-devel] USB with stm32f411ce Zygmunt Ptak
• 2017/11/30 Re: [libopencm3-devel] USB with stm32f411ce Zygmunt Ptak
• 2017/11/27 Re: [libopencm3-devel] USB with stm32f411ce Chuck McManis
• 2017/11/27 Re: [libopencm3-devel] USB with stm32f411ce Zygmunt Ptak
• 2017/11/27 Re: [libopencm3-devel] USB with stm32f411ce Karl Palsson
• 2017/11/27 Re: [libopencm3-devel] USB with stm32f411ce Chuck McManis
• 2017/11/27 [libopencm3-devel] USB with stm32f411ce Zygmunt Ptak
• 2017/07/14 Re: [libopencm3-devel] Makefile / standards issue building libopencm3 Karl Palsson
• 2017/07/13 Re: [libopencm3-devel] Makefile / standards issue building libopencm3 Warren Gay
• 2017/07/13 [libopencm3-devel] Makefile / standards issue building libopencm3 Warren Gay
• 2017/06/17 Re: [libopencm3-devel] stm32f105/7 ld files Karl Palsson
• 2017/06/17 Re: [libopencm3-devel] stm32f105/7 ld files karl
• 2017/06/17 [libopencm3-devel] RCC_APB2ENR_TIM16EN/17EN wrong karl
• 2017/06/10 Re: [libopencm3-devel] stm32f105/7 ld files karl
• 2017/06/10 Re: [libopencm3-devel] stm32f105/7 ld files Karl Palsson
• 2017/06/10 [libopencm3-devel] stm32f105/7 ld files karl
• 2017/05/23 Re: [libopencm3-devel] lib/stm32/can.c correction request: can_filter_id_mask_16bit_init() Karl Palsson
• 2017/05/19 [libopencm3-devel] lib/stm32/can.c correction request: can_filter_id_mask_16bit_init() Warren Gay
• 2017/05/06 [libopencm3-devel] lib/stm32/can.c problem in can_init() and CAN_BTR_BRP_MASK Warren Gay
• 2017/04/17 Re: [libopencm3-devel] getting clockspeed of the CPU kristoff
• 2017/04/17 Re: [libopencm3-devel] getting clockspeed of the CPU Chuck McManis
• 2017/04/17 Re: [libopencm3-devel] getting clockspeed of the CPU kristoff
• 2017/04/16 Re: [libopencm3-devel] getting clockspeed of the CPU Chuck McManis
• 2017/04/16 [libopencm3-devel] getting clockspeed of the CPU kristoff
• 2017/03/26 Re: [libopencm3-devel] multiple acm (serial) links on one USB port kristoff
• 2017/03/26 Re: [libopencm3-devel] multiple acm (serial) links on one USB port Karl Palsson
• 2017/03/26 Re: [libopencm3-devel] multiple acm (serial) links on one USB port Daniel Thompson
• 2017/03/25 Re: [libopencm3-devel] multiple acm (serial) links on one USB port Jason Kotzin
• 2017/03/25 [libopencm3-devel] multiple acm (serial) links on one USB port kristoff
• 2017/03/17 Re: [libopencm3-devel] USB-CAN adaptor Edward Cheeseman
• 2017/03/16 Re: [libopencm3-devel] Baffling: usbd_init() hang for stm32f103c8t6 and USB-CAN adaptor Sam Ellicott
• 2017/03/14 Re: [libopencm3-devel] USB: stm32/st_usbfs_v1 vs st_usbfs_v2 (stm32f103) Karl Palsson
• 2017/03/14 Re: [libopencm3-devel] USB: stm32/st_usbfs_v1 vs st_usbfs_v2 (stm32f103) Angelo Di Chello
• 2017/03/14 [libopencm3-devel] USB: stm32/st_usbfs_v1 vs st_usbfs_v2 (stm32f103) Warren Gay
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Karl Palsson
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Chuck McManis
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Chuck McManis
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Chuck McManis
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Karl Palsson
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Karl Palsson
• 2017/03/13 Re: [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/12 Re: [libopencm3-devel] Delay required after enabling peripheral clock Chuck McManis
• 2017/03/12 [libopencm3-devel] Delay required after enabling peripheral clock Matthew Lai
• 2017/03/11 Re: [libopencm3-devel] Baffling: usbd_init() hang for stm32f103c8t6 and USB-CAN adaptor Edward Cheeseman
• 2017/03/11 Re: [libopencm3-devel] Baffling: usbd_init() hang for stm32f103c8t6 Warren Gay
• 2017/03/11 Re: [libopencm3-devel] Baffling: usbd_init() hang for stm32f103c8t6 Edward Cheeseman
• 2017/03/11 [libopencm3-devel] Baffling: usbd_init() hang for stm32f103c8t6 Warren Gay
• 2017/03/05 Re: [libopencm3-devel] using cdc acm (serial over usb) kristoff
• 2017/03/04 Re: [libopencm3-devel] using cdc acm (serial over usb) Karl Palsson
• 2017/03/03 Re: [libopencm3-devel] using cdc acm (serial over usb) Dave Hylands
• 2017/03/03 Re: [libopencm3-devel] using cdc acm (serial over usb) Karl Palsson
• 2017/03/02 [libopencm3-devel] using cdc acm (serial over usb) kristoff
• 2017/02/24 Re: [libopencm3-devel] Request: USART TX/RX busy status Warren Gay
• 2017/02/24 Re: [libopencm3-devel] Request: USART TX/RX busy status karl
• 2017/02/20 Re: [libopencm3-devel] Request: USART TX/RX busy status Karl Palsson
• 2017/02/20 Re: [libopencm3-devel] Request: USART TX/RX busy status Chuck McManis
• 2017/02/20 [libopencm3-devel] Request: USART TX/RX busy status Warren Gay
• 2017/02/17 Re: [libopencm3-devel] strange compilation error for cdcacm.c with using C++ kristoff
• 2017/02/17 Re: [libopencm3-devel] strange compilation error for cdcacm.c with using C++ Karl Palsson
• 2017/02/16 Re: [libopencm3-devel] strange compilation error for cdcacm.c with using C++ kristoff
• 2017/02/14 Re: [libopencm3-devel] strange compilation error for cdcacm.c with using C++ Matthew Lai
• 2017/02/14 [libopencm3-devel] strange compilation error for cdcacm.c with using C++ kristoff
• 2017/02/01 Re: [libopencm3-devel] F4 GPIO header question Sid Price
• 2017/02/01 Re: [libopencm3-devel] F4 GPIO header question Karl Palsson
• 2017/01/31 Re: [libopencm3-devel] F4 GPIO header question Chuck McManis
• 2017/01/31 Re: [libopencm3-devel] F4 GPIO header question Sid Price
• 2017/01/31 Re: [libopencm3-devel] F4 GPIO header question Sid Price
• 2017/01/31 Re: [libopencm3-devel] F4 GPIO header question Chuck McManis
• 2017/01/31 Re: [libopencm3-devel] F4 GPIO header question Dave Hylands
• 2017/01/31 [libopencm3-devel] F4 GPIO header question Sid Price
• 2017/01/27 Re: [libopencm3-devel] Newbie clock questions Sid Price
• 2017/01/27 Re: [libopencm3-devel] Newbie clock questions Chuck McManis
• 2017/01/27 [libopencm3-devel] Newbie clock questions Sid Price
• 2017/01/22 Re: [libopencm3-devel] USB MIDI not working Daniel Thompson
• 2017/01/20 [libopencm3-devel] USB MIDI not working Thorsten
• 2016/08/19 [libopencm3-devel] Bidirectional 3-wire SPI communication example for STM32F1 Anatol Pomozov
• 2016/05/25 Re: [libopencm3-devel] I2C support for STM32F0 Karl Palsson
• 2016/05/15 [libopencm3-devel] I2C support for STM32F0 Johan
• 2016/04/28 Re: [libopencm3-devel] libopencm3, spi and stm32f103 kristoff
• 2016/04/28 Re: [libopencm3-devel] libopencm3, spi and stm32f103 Karl Palsson
• 2016/04/27 [libopencm3-devel] libopencm3, spi and stm32f103 kristoff
• 2016/04/26 Re: [libopencm3-devel] WCID Support Robert Ritchey
• 2016/04/26 Re: [libopencm3-devel] WCID Support Karl Palsson
• 2016/04/26 Re: [libopencm3-devel] WCID Support Robert Ritchey
• 2016/04/26 Re: [libopencm3-devel] WCID Support Chuck McManis
• 2016/04/26 Re: [libopencm3-devel] WCID Support Robert Ritchey
• 2016/04/26 Re: [libopencm3-devel] WCID Support Karl Palsson
• 2016/04/26 [libopencm3-devel] WCID Support Robert Ritchey
• 2016/04/25 Re: [libopencm3-devel] Status of usb for Stm32f0? Karl Palsson
• 2016/04/25 [libopencm3-devel] Status of usb for Stm32f0? Johan
• 2016/04/23 [libopencm3-devel] example linking an external c++ library kristoff
• 2016/01/22 Re: [libopencm3-devel] STM32F373 support Karl Palsson
• 2016/01/21 [libopencm3-devel] STM32F373 support Donald E Haselwood
• 2015/11/27 Re: [libopencm3-devel] Systick_Config() Elmo
• 2015/11/26 [libopencm3-devel] Systick_Config() Karl Robinsod
• 2015/11/23 Re: [libopencm3-devel] LPC17xx clock.h typo Karl Palsson
• 2015/11/22 [libopencm3-devel] LPC17xx clock.h typo Karl Robinsod
• 2015/11/19 Re: [libopencm3-devel] Would you consider adding a GPLv2 license? Paul Fertser
• 2015/11/19 Re: [libopencm3-devel] Would you consider adding a GPLv2 license? Chuck McManis
• 2015/11/19 Re: [libopencm3-devel] Would you consider adding a GPLv2 license? Paul Fertser
• 2015/11/19 Re: [libopencm3-devel] Would you consider adding a GPLv2 license? Daniele Lacamera
• 2015/11/18 Re: [libopencm3-devel] Would you consider adding a GPLv2 license? Alex Gagniuc
• 2015/11/16 [libopencm3-devel] Would you consider adding a GPLv2 license? Daniele Lacamera
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Matthew Lai
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Matthew Lai
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Jason Kotzin
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Matthew Lai
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Karl Palsson
• 2015/11/09 Re: [libopencm3-devel] CDC ACM retries Matthew Lai
• 2015/11/08 [libopencm3-devel] CDC ACM retries Matthew Lai
• 2015/10/26 [libopencm3-devel] Issue on libopencm3-examples, usb-cdc maple-mini Kannan
• 2015/10/20 Re: [libopencm3-devel] F4Discovery OTG & audio demos? Karl Palsson
• 2015/10/20 [libopencm3-devel] F4Discovery OTG & audio demos? Mike Meyer
• 2015/09/05 [libopencm3-devel] USB testing progress Karl Palsson
• 2015/08/11 Re: [libopencm3-devel] Encoder problems Thorsten Eggert
• 2015/08/11 Re: [libopencm3-devel] Encoder problems Frank Duignan
• 2015/08/11 [libopencm3-devel] Encoder problems Thorsten Eggert
• 2015/07/29 Re: [libopencm3-devel] Define naming conventions Karl Palsson
• 2015/07/15 Re: [libopencm3-devel] Timer2 DMA problems Bernard Mentink
• 2015/07/13 [libopencm3-devel] Timer2 DMA problems Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Chuck McManis
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Chuck McManis
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Chuck McManis
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Chuck McManis
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] Floating Point .. Linking error Chuck McManis
• 2015/07/10 [libopencm3-devel] Floating Point .. Linking error Bernard Mentink
• 2015/07/10 Re: [libopencm3-devel] STM32F4 ADC --> DMA issue Karl Palsson
• 2015/07/09 Re: [libopencm3-devel] STM32F4 ADC --> DMA issue Karl Palsson
• 2015/07/09 Re: [libopencm3-devel] STM32F4 ADC --> DMA issue Chuck McManis
• 2015/07/09 [libopencm3-devel] STM32F4 ADC --> DMA issue Bernard Mentink
• 2015/07/06 [libopencm3-devel] Define naming conventions Ingo Becker
• 2015/05/28 Re: [libopencm3-devel] Are there any example of interrupt driven usb-cdcacm for STM32 Hesky Fisher
• 2015/05/28 [libopencm3-devel] Are there any example of interrupt driven usb-cdcacm for STM32 Johan
• 2015/05/15 [libopencm3-devel] Request to merge pull request #411 Add 84Mhz for STM32F4. Johan
• 2015/03/29 [libopencm3-devel] STM32F103 SPI reset pulse width Tom Schouten
• 2015/03/15 Re: [libopencm3-devel] example of higher level GPIO api Chuck McManis
• 2015/03/15 Re: [libopencm3-devel] example of higher level GPIO api Daniel Serpell
• 2015/03/15 [libopencm3-devel] example of higher level GPIO api Chuck McManis
• 2015/03/14 [libopencm3-devel] [PATCH 1/2] [stm32f1-afio] remove restriction that made it impossible to set RMII mode Paul Fertser
• 2015/03/14 [libopencm3-devel] [PATCH 2/2] [stm32f1-Makefile] enable full gdb debugging support Paul Fertser
• 2015/02/28 Re: [libopencm3-devel] Timer ISR on STM32F1 Michael Smith
• 2015/02/28 Re: [libopencm3-devel] Timer ISR on STM32F1 Tommi Rouvali
• 2015/02/27 Re: [libopencm3-devel] Timer ISR on STM32F1 Jorik Jonker
• 2015/02/26 Re: [libopencm3-devel] Timer ISR on STM32F1 Frank Duignan
• 2015/02/26 Re: [libopencm3-devel] Timer ISR on STM32F1 Mike Smith
• 2015/02/26 [libopencm3-devel] Timer ISR on STM32F1 Jorik Jonker

• Earlier messages