One more thing, I notice “adc_calibrate” is in adc_common_v2.c, my build of
libopencm3 is using adc_common_v1.c. Should I be using v2?
Sid
From: Sid Price [mailto:[email protected]]
Sent: Tuesday, January 31, 2017 5:02 PM
To: 'Chuck McManis' <[email protected]>; 'Dave Hylands'
<[email protected]>
Cc: '[email protected]'
<[email protected]>
Subject: RE: [libopencm3-devel] F4 GPIO header question
Dave, Chuck, thanks for the pointers. I am, slowly working my way through the
differences.
There are a couple of methods for the ADC I can’t find in the libopencm3
documentation so I assume they have been deprecated. For example, “adc_off,
adc_reset_calibration, and adc_calibration.” Is the same functionality
available with other methods?
Sid
From: Chuck McManis [mailto:[email protected]]
Sent: Tuesday, January 31, 2017 2:58 PM
To: Sid Price <[email protected] <mailto:[email protected]> >
Cc: [email protected]
<mailto:[email protected]>
Subject: Re: [libopencm3-devel] F4 GPIO header question
That is correct Sid, the F1 and the F4 have different GPIO architectures so the
flags are incompatible.
--Chuck
On Tue, Jan 31, 2017 at 12:41 PM, Sid Price <[email protected]
<mailto:[email protected]> > wrote:
The project I am porting to STM32F411RE makes use of an ADC, when looking at
the f4/gpio.h file I don’t see “GPIO_CNF_INPUT_ANALOG” defined, in fact the F4
file has many defines not included. It is defined in the F1/gpio.h file. Does
this mean the gpio.h header needs updating for the F4? How can I resolve this?
Also, a similar situation exists for some ADC definitions. The define
“ADC_SMPR_SMP_28DOT5CYC” is defined in f1/adc.h but not in f4/adc.h.
Is it OK to use the F1 includes?
Any input would be appreciated,
Sid
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
libopencm3-devel mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/libopencm3-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
libopencm3-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/libopencm3-devel
