>>> In all honesty, I'm not prepared to reflash the bootloader since I >>> don't >>> have a JTAG in case things go wrong. >>> >>> That being said, the source for the modified u-boot is here: >>> http://www.downloads.netgear.com/files/GPL/WNR2200_V1.0.1.88_gpl_src.zip >>> (The u-boot sources are under git_home/u-boot.git, and you can compile >>> it by typing "make wnr2200_config && make". You'll need the MIPS >>> toolchain, though. I haven't tried this yet.) >>> >>> As for reflashing the bootloader, I'm not really sure how you would do >>> this, but the guidelines here could be modified, perhaps: >>> https://forum.openwrt.org/viewtopic.php?id=28712 > > Ah! I just found instructions on how to compile and flash the > bootloader! see git_home/u-boot.git/doc/README.wnr2200
It is not a hard process, but you do need to be careful. A serial cable would help for debugging. If you brick it fully, a chipclip and a SPI programmer will be needed. _______________________________________________ Librecmc-dev mailing list Librecmc-dev@lists.librecmc.org https://lists.librecmc.org/mailman/listinfo/librecmc-dev
