On 16/09/14 07:55, Robert Call wrote: >>>> In all honesty, I'm not prepared to reflash the bootloader since I >>>> don't >>>> have a JTAG in case things go wrong. >>>> >>>> That being said, the source for the modified u-boot is here: >>>> http://www.downloads.netgear.com/files/GPL/WNR2200_V1.0.1.88_gpl_src.zip >>>> (The u-boot sources are under git_home/u-boot.git, and you can compile >>>> it by typing "make wnr2200_config && make". You'll need the MIPS >>>> toolchain, though. I haven't tried this yet.) >>>> >>>> As for reflashing the bootloader, I'm not really sure how you would do >>>> this, but the guidelines here could be modified, perhaps: >>>> https://forum.openwrt.org/viewtopic.php?id=28712 >> >> Ah! I just found instructions on how to compile and flash the >> bootloader! see git_home/u-boot.git/doc/README.wnr2200 > > It is not a hard process, but you do need to be careful. A serial > cable would help for debugging. If you brick it fully, a chipclip > and a SPI programmer will be needed.
I don't have any of those things, so I guess it would be better not to. _______________________________________________ Librecmc-dev mailing list Librecmc-dev@lists.librecmc.org https://lists.librecmc.org/mailman/listinfo/librecmc-dev
