Date: Sun, 23 Apr 2000 07:22:43 -0700 (PDT) From: "=?iso-8859-1?q?Jacques=20D'Hondt?=" <[EMAIL PROTECTED]> Subject: I have crashed my keyboard by installing a 9.5 height HDD Hi all, I have make a lot of tests to find the better solution for me to upgrade my original's Toshiba HDD in both my Lib 100 and 110 (I'll posted the method's and results here later) I have placed a 6GB Fujitsu (9.5 mm height) without any problem in my Lib 100 (very good HDD and the fastest I have try) Then, I have placed a 12GB IBM (DARA-212000, 9.5 mm height) in my Lib 110. At the beginning, I have not seen any problem. But, because of mutiple tests (Formatting with Disk Manager, Partition Magic, etc...) I have put in and out the HDD three or four times (the IBM enter with more difficulty than the Fujitsu). And suddenly, I have loose access to some keys on the built-in lib keyboard. These keys are on two adjacent columns, physically just at the right end edge of the HDD. Here are the dead keys : F6, F7, 6, 7, Y, U, H, J, N, M, AltGr, INS. Unfortunately the keyboard itself is OK (I have switch it with this of my Lib 100). I presume thus that there is an internal damaged connector or soldering and I am afraid that I am now forced to return this lib at a repair center. Any ideas or analog problem ? ===== Jacques D'Hondt - Brussels - Belgium __________________________________________________ Do You Yahoo!? Send online invitations with Yahoo! Invites. http://invites.yahoo.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************
