Date: Wed, 14 Jun 2000 23:29:32 -0400
From: "Pres Waterman" <[EMAIL PROTECTED]>
Subject: Re: Reformat and reload Libretto 100ct
OK... here's a very simple way. You need a desktop ( or another laptop )
with a CD drive, and the appropriate adapter to temporarily use the Libretto
100's HDD in the desktop. Write down your current serial number with the
xxxxx-OEM-xxxxxx-xxxxx format.
You need a copy of the Libretto 100 recovery CD, and a boot floppy with
CD-rom drivers. Boot to the floppy, and run the recovery CD which will
format the Libretto HDD ( remember it is now temporarily in the desktop or
laptop as a c: drive ) and do a format and factory install with software,
applications and drivers just like the day it was born. Now, WITHOUT booting
the desktop or laptop to check your work, move the HDD back into the
Libretto, boot, supply your license info, and enjoy the "new" Libretto. I
did this after buying a used L100 with at least 3 different people
registered in the various junk software added. Clean, nice.
I can supply a copy of such a CD if you send me a blank CD, return postage
and good wishes.
Pres Waterman W2PW
c/o Patchogue Motors, Inc.
Long Island Ford and Kia Dealer
GO BILLS!
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
