Date: Thu, 20 Jul 2000 07:43:20 +0100 From: "John Cooper" <[EMAIL PROTECTED]> Subject: Libretto FDD Driver Win98 Hi all I am having some dificulty in getting this message to the maiilist! If you do receive it more than once, I do apologise. I have just installed a new 6.4gb hard drive into my Lib 100CT. Prior to doing this, I installed the 2.5" drive in another PC, formatted it and copied the entire contents of the WIN98 into a folder named WIN98SE on the 2.5" drive. Having fixed the drive in the Lib, I then started the Lib using a Win98 boot disk and ran Windows 98 setup. The process was quite painless and completed okay. When I restarted the Lib in Win98, I discovered I couldn't access the Lib's floppy drive! I checked the 'control Panel/system devices' and discovered the floppy drive was highlighted with an asterix - details showed the Y-E DATA-External FDD driver was not installed! Where can I get this driver from? I would guess that to install the driver files, I could make a 'boot up' floppy and whilst in DOS copy the Windows drivers from the floppy to the hard drive and then restart the Lib? Hope someone can assist. Regards John ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************
