Date: Thu, 24 Aug 2000 10:16:52 -0700 (PDT)
From: [EMAIL PROTECTED]
Subject: RE: fdisk question (non-Lib specific)

Well in that case you just need 1 copy of ghost enterprise edition.  It
will expand the partition and dump NT.  Takes 15-30 minutes per operating
system.  That way you just pay for 1 ghost EE and NT Workstation.  Just
make sure you download NewSID (free).

                                Andy

> This is supposed to be a rather automated install for the masses who don't
> have the hardware to install Win2000.  I can't justify buying 5,000 copies
> of PartMagic for an OS that is being phased out via attrition.
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 24, 2000 12:38 PM
> To: Libretto
> Subject: RE: fdisk question (non-Lib specific)
> 
> 
> Date: Thu, 24 Aug 2000 09:21:10 -0700 (PDT)
> From: [EMAIL PROTECTED]
> Subject: RE: fdisk question (non-Lib specific)
> 
> Why not just create an fat 16 partition, install NT, Get everything
> working, convert it to NTFS after NT has been installed and working.  Then
> run partition magic and extend the rest of that partition to the entire
> disk.  Thus one big partition.
> 
>                               Andy
> 
> 
> > I was afraid someone would ask.  Here's the short version of it:
> > 
> > My automated/unattended installation of NT4 requires a fat16 primary
> > partition.  No problem except that fat16 from a dos6.22 fdisk is limited
> to
> > 2.047GB.  After NT is installed, the remainder of the drive can be
> > partitioned as needed but you are still stuck with the 2GB C:.  Using the
> > "extendOEMpartition" option, I can tell the installation to use the
> primary
> > partition (2GB) and any free space following it up to the 8GB limit as the
> > new C:.  If there is a second partition on the drive and it is immediately
> > following the primary partition (which is where fdisk will place it) then
> > the extendOEMpartition is useless for creating a 4GB C: and a 2GB D: in
> this
> > way.  I need a 2GB primary, xGB free space, and then a 2GB extended
> > partition in that order.
> > 
> > My solution now is tedious at best.  Please hold on to the bar for this
> > one...
> > 
> > 1.  Boot with a fat32 boot disk.  Create a 4GB primary partition.
> > 2.  Boot with a fat16 boot disk.  Create a 10MB primary partition and a
> 2GB
> > extended partition.
> > 3.  Boot with a fat32 boot disk.  Delete the 10MB primary partition.
> > 4.  Boot with a fat16 boot disk.  Delete the 4GB (non-DOS) partition.
> > Create a 2GB primary partition.
> > 
> > The 10MB primary from the fat16 disk is needed in order for dos6.22 to let
> > me create the fat16 extended partition.  Fat32 then sees 2 primary
> > partitions and lets me delete one of them.  Fat16 sees the fat32 primary
> as
> > a non-DOS partition and lets me delete it as well thus leaving a single
> > extended partition at the end of the disk and the ability to create a 2GB
> > primary at the beginning.
> > 
> > I told you it was tedious.
> > 
> > 
> > 
> > 
> > **************************************************************
> > http://libretto.basiclink.com - Libretto mailing list                
> > http://libretto.basiclink.com/archive - Archives
> > http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
> >                  -------UNSUBSCRIBE-------                            
> > mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
> >         --------UNSUBSCRIBE DIGEST------
> > Use above but add DIGEST to the subject line...                           
> > **************************************************************
> > 
> 
> 
> 
> 
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list                
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
>                  -------UNSUBSCRIBE-------                            
> mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
>           --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line...                           
> **************************************************************
> 
> 
> 
> 
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list                
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
>                  -------UNSUBSCRIBE-------                            
> mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
>           --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line...                           
> **************************************************************
> 




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to