Date: Sun, 15 Oct 2000 22:06:14 -0400
From: "Ryan" <[EMAIL PROTECTED]>
Subject: Pinout for LCD Display, 100/110
Hello Folks, wondering if anyone here has ever attempted to separate their Display
from the main board. My reason is that my poor little 100 (O/C'd to 266mhz) simply
just doesn't have enough "Oomph" to suit my needs. However I want to retain the LCD
for my car (Try finding a 7.1"-7.5" active matrix capable of VGA, next to impossible
was my experience). I could purchase a PCI LCD video board for a desktop and run the
box in the trunk and the display up front. The only big stumbling block I can see is
what control signals run on what wires to interface with the LCD board. I'll probably
need a amplifier for the control signals as well. Any help if correctly identifying
what wires do what would be appreciated.
Thanks!
Ryan
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
