Date: Mon, 16 Oct 2000 11:43:49 -0400
From: "Pres Waterman" <[EMAIL PROTECTED]>
Subject: Re: Pinout for LCD Display, 100/110
> Hello Folks, wondering if anyone here has ever attempted to separate their
Display from the main board. My reason is that my poor little 100 (O/C'd to
266mhz) simply just doesn't have enough "Oomph" to suit my needs. However I
want to retain the LCD for my car (Try finding a 7.1"-7.5" active matrix
capable of VGA, next to impossible was my experience). I could purchase a
PCI LCD video board for a desktop and run the box in the trunk and the
display up front. The only big stumbling block I can see is what control
signals run on what wires to interface with the LCD board. I'll probably
need a amplifier for the control signals as well. Any help if correctly
identifying what wires do what would be appreciated.
Wow. If you need more processor than the Libretto, but like the package for
in-car use, you would be MUCH better off using the Libretto as a remote
control for a beefier machine in the trunk. Use PCAnywhere, LapLink, Carbon
Copy type programs with ethernet as the fastest link to the stronger
machine.
Pres Waterman W2PW
c/o Patchogue Motors, Inc.
Long Island Ford and Kia dealer
GO BILLS!
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
