Date: Mon, 13 Nov 2000 05:50:17 -0500
From: "David Hettel" <[EMAIL PROTECTED]>
Subject: Re: Libretto 100CT PCI - cardbus driver missing

Joe;
When you insert the KingMax card, do you have
it's installion disk in your floppy? Sounds like you
need drivers for your KingMax card. Which you will
not find on your Toshiba Disk.

David Hettel


----- Original Message -----
From: "Joe Hovel" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Monday, November 13, 2000 3:58 AM
Subject: Libretto 100CT PCI - cardbus driver missing


> Date: Mon, 13 Nov 2000 19:56:28 +1100
> From: "Joe Hovel" <[EMAIL PROTECTED]>
> Subject: Libretto 100CT PCI - cardbus driver missing
>
> I can't get my cardbus LAN card going at all - in Control Panel | System |
> device driver is a non-functioning "PCI Ethernet Controller" and an
> "Unsupported PCI device" listed as not functioning. Removing them will get
> Win95B go through the "plug and not play" routine and it can't find any
> drivers for the "unsupported devices".....
> I thought I had all the L100 drivers, but clearly not... I've tried all
the
> Toshiba disks I have - no go....
> The LAN Card I'm trying to run is a KingMax 10.100 Ethernet card.
>
> Any clues, please?
> Joe
>
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ
>                  -------UNSUBSCRIBE-------
> mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
>     --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line...
> **************************************************************
>




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to