Date: Sat, 2 Dec 2000 05:44:17 -0800 (PST) From: steve steve <[EMAIL PROTECTED]> Subject: Shawn re: your floppy drive not working Shawn, Try following Davids excellent advice. David, thanks for that. As I had already tried to load the correct drivers, all I had to do was remove the "Y-E Data PCMCIA floppy" in control panel and reboot with the drive attached. Auto detected fine. drive *********************************** Date: Sat, 25 Nov 2000 19:24:52 -0500 From: "David Hettel" <[EMAIL PROTECTED]> Subject: Re: Still having problems with my Lib70 and floppy in Win98 Steve; Go into device manger and remove your current driver for your floppy. Then Shut down your computer (do not restart but do a shut down) remove the floppy drive. Turn your computer back on. After win98 comes backup, plug in your disk drive. Point it to where you have downloaded this file: ftp://cdgenp01.csd.toshiba.com/content/support/downloads/l110fdd8.exe This is the win98 floppy driver for the PCMCIA Floppy drive. HTH David Hettel ----- Original Message ----- From: "steve steve" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Saturday, November 25, 2000 3:25 PM Subject: Still having problems with my Lib70 and floppy in Win98 > Date: Sat, 25 Nov 2000 12:20:41 -0800 (PST) > From: steve steve <[EMAIL PROTECTED]> > Subject: Still having problems with my Lib70 and floppy in Win98 > > Please can anyone help me with my Win98 installation > on my Lib70 that won't allow me to access my PCMCIA > floppy drive? > > Cheers, > > Steve ************************** __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************
