Date: Fri, 22 Dec 2000 16:06:04 +0100
From: Paul Bristow <[EMAIL PROTECTED]>
Subject: Re: IBM HDD
My IBM 20G went straight in to a 100CT with no jumpers needed. I think
this applied to L70 and lower.
Simon Shuker wrote:
>
> Date: Thu, 21 Dec 2000 09:11:23 +1300
> From: Simon Shuker <[EMAIL PROTECTED]>
> Subject: IBM HDD
>
> I was looking to replace my damaged (currently wheezing its last) 6.4G
> Toshiba HDD, and the only one I can easily source locally is the IBM 10G
> DJSA-210 HDD (9.5mm height, no problem with the +8G size as the 1050 bios
> will recognise it).
>
> Just one question though - I recall that when people were dropping the 20G
> IBM drive into their librettos they had to run a jumper across a couple of
> the pins to make it work - any idea what exactly this was or if it applies
> to this drive?
>
> thanks,
>
> Simon
>
--
Paul
Email: [EMAIL PROTECTED]
Web: http://paulbristow.net
ICQ: 11965223
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
