Date: Thu, 22 Mar 2001 11:50:00 -0800 (PST)
From: David Chien <[EMAIL PROTECTED]>
Subject: Re: Splitting and upgrading!
> I am in the process of replacing my 100ct with a 110ct and am not sure about
> the following. If I swap the hard drives between the machines, will the new
> one then run the same as my old one, just faster or is their anything in
Yes, simply swap the two.
> One of my reasons for upgrading is that the screen/hinge is a bit knackered
> on my old one. Does anyone have any experience with the wiring that link the
> base part and lid? I am playing with the idea of splitting them and
> extending the wiring for in-car/GPS navigation use. I could then dash mount
> the screen with the "gubbins" all discreetly out of the way, maybe in the
> lid of the drivers side glove compartment. Any thoughts??
My site for exploded view and parts list. www.micsol.com for replacement
parts. As long as you extend the LCD cable all the way, and feed the LCD panel
the required power, then you should be able to remote mount the panel anywhere
you wish. Happily, the LCD is pretty much a stand-alone part in the top part
of the Libretto panel, so you don't have to move much from the bottom half.
d =)
=====
adorable toshiba libretto
The latest news and information for the Toshiba Libretto owner.
http://www.silverace.com/libretto/
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************