Date: Tue, 26 Jun 2001 12:06:29 -0400
From: "Lawrence Young" <[EMAIL PROTECTED]>
Subject: Re: L100 and DLINK wireless card
----- Original Message -----
From: "Konrad Szwab" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Tuesday, June 26, 2001 11:25 AM
Subject: Re: L100 and DLINK wireless card
> Date: Tue, 26 Jun 2001 10:21:40 -0500
> From: Konrad Szwab <[EMAIL PROTECTED]>
> Subject: Re: L100 and DLINK wireless card
>
> Well, mine works fine on a Dell C600 laptop with win2k, but on the L100
with
> 98SE it would not initialize properly. I even tried to forcefully tell it
to
> use the same HW settings as the Dell used (IRQ 10 and base addr DF70, but
it
> still would not initilize). I took out the config utility from startup,
too,
> but that did not help.
> When the computer boots up, instead of the successful PCMCIA sound I get
the
> low warning beep of a PCMCIA failure, and the thing would not init.
> I run the latest BIOS for the L100. What HW settings do you guys use that
> have the Dlink card running ?
I'm using it on my L100. I'm not sure about Win98SE. Did you check Dlink's
site for latest driver for WIn98? Dlink is kind of lazy to update the
drivers but believe or not other manufacturer's driver also works. I tried
Linksys driver once. Basically all these 802.11b wireless cards use the same
chipset and same driver from chip manufacturer Inersil.
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
