Date: Tue, 21 Aug 2001 20:51:31 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: Replacing 70CT LCD
I just pulled the top half of the case with the screen off my 50CT, and
installed it on the 70CT whose screen had blinked a few times and then went
black. The darned 50CT screen doesn't work on the 70CT bottom end, but the
70CT screen/top end I thought had gone bad works fine on the old 50CT bottom
end. The screen lights up complete with its one burned out pixel that I
thought was an indication of what went wrong.
Obviously the lamps and board Neil mentioned are not the source of the
problem... nor is the LCD.
Now I don't know if I'm in a better or worse situation than before. If I'd
had a bad screen/tip end... I'd at least have the 70CT working with the 50CT
top side. At this I'm stuck with the problem 70CT bottom end and am back to
my pokey 50CT to use in the meanwhile.
Anyone have and ideas just what I might be able to check at this point? I'm
stymied.
Matt
PS: Thanks for the tip on separating the case halves Neil.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
