Date: Sat, 1 Sep 2001 00:18:09 +0100
From: "Dave's Libretto" <[EMAIL PROTECTED]>
Subject: Re: Replacing 100CT Display Latches
> Has anyone ever replaced a latch? What's the next step? I can't find any
> information on how to disassemble the display unit ... is it a difficult
> procedure? Thanks in advance to anyone who can shed a little light.
I took the plastic surround away from the screen when looking for places to
hide a switchable overclock.
Remove the two screws under the little grey plastic squares below the
screen, and then GENTLY prise apart the plastic casing. Be VERY careful
doing this tho as the plastic catches holding the two parts together are
rather delicate.
The bottom part clips into the top part (ie. the part with the hold for the
screen)
HTH
Dave
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
