Date: Sat, 01 Sep 2001 03:43:59 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: Replacing 100CT Display Latches
>From: "Dave's Libretto" <[EMAIL PROTECTED]>
>Remove the two screws under the little grey plastic squares below the
>screen,
I may add that if you want to put these sticky acked grey plastic covers
back nicely after you're done, you should pry them off VERY carefully with a
shape scalpel like knife. Put them somewhere where the adhesive on the back
doesn't get dust, dirt, or oil from your fingers on them. Then replace them
without touching the adhesive side.
Matt
>and then GENTLY prise apart the plastic casing. Be VERY careful
>doing this tho as the plastic catches holding the two parts together are
>rather delicate.
>The bottom part clips into the top part (ie. the part with the hold for the
>screen)
>
>HTH
>
>Dave
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
