Date: Thu, 10 Jan 2002 20:10:31 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: RE: [LIB] David's Hitachi 20GB HDD
>Date: Thu, 10 Jan 2002 10:00:42 -0600 >From: "phillip ramirez" <[EMAIL PROTECTED]> > >Yes that�s where I dl the file.. Slap it in your libby and boot it it >wont cause any damage and test it.. Hmmm... I'm not sure just what this program is going to do, even if I have/get the right version. Is it going to flash the BIOS on the MB? And if so, will I be able to flash it back if there are problems. Also, though I assume not, if it flashes the BIOS, will there be any conflicts with any older, smaller drives. Have you downloaded and tested the other 2 versions of EZ Drive that have posted? Matt > >-----Original Message----- >From: Matthew Hanson [mailto:[EMAIL PROTECTED]] >Sent: Thursday, January 10, 2002 4:04 AM >To: Libretto >Subject: RE: [LIB] David's Hitachi 20GB HDD > > >Date: Thu, 10 Jan 2002 09:59:07 +0000 >From: "Matthew Hanson" <[EMAIL PROTECTED]> >Subject: RE: [LIB] David's Hitachi 20GB HDD > > >Date: Wed, 9 Jan 2002 16:21:27 -0600 > >From: "phillip ramirez" <[EMAIL PROTECTED]> > > > >Well when I dl 9.09w it actually was 9.10 when I run it on boot. So I > >am > >trying to find 9.09w anyone have a good copy?? > >I went to the URL David posted, or something close, and downloaded >ezdrive9.exe, which is listed as EZ Drive v.9.09W. Is that the filename >you >have, and did you download your copy here: > > http://www.vobis.de/bbs/firmen/wd/hrddrive/ > >If so, I wonder if I'll have the same problem. Let me know. > >Matt _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
