Date: Thu, 17 Jan 2002 13:52:48 +0000
From: Paul Davey <[EMAIL PROTECTED]>
Subject: [LIB] - L70 no power after hot undocking from EPR?
Hi,
I'm sure I'm not the first person this happened to - but I can't find any
web page or
archive listing the problem - never mind a solution.
I have a L70 and managed to pick up an enhanced port replicator a year or
so back.
All was well until I failed to power down the L70 before undocking.
(The manual warns you not to do this - but it's all too easy ...)
Now my libretto works fine on the EPR when docked - (power is then supplied
from the normal PSU via the EPR through the base connection) ---
but the regular side power-in socket no longer powers up the machine,
and it seems that the battery is not charging in either configuration.
I have split the battery pack (tougher than I expected) and checked the
internal themal
fuse and all seems well there
So I assume I have blown a fuse or transistor within the L70.
Anyone have any suggestions?
Fixes (I'm fairly competent with a soldering iron) or repair services (in UK?)?
regards
Paul
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
