Date: Fri, 01 Mar 2002 05:59:05 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Microdrive not recognized at L110 boot-up
>Date: Fri, 01 Mar 2002 06:59:37 +0800 >From: Raymond <[EMAIL PROTECTED]> > >>My IBM 340 Microdrive is not recognized at the Lib 110 boot-up. I have >to insert it in the PCMCIA slot after the initialization process, and then >Win98 SE can see it and assign a drive letter.<< < > > > >Just curious... I have a similar problem with a combo modem on my L70 >that's probably a different issue. Does W98 SE fully boot for you with the >drive inserted? My problem is that if I boot W98 (not SE) with the modem >inserted, the whole system powers off halfway through the boot process.< < > > > >Funny... if I remove the HDD, put in in my L50, and insert the modem, it >boots fine.< < > >Hmm ... well my L100 crashes if I have my ATA CD-ROM card in as it boots >but if I insert it after boot time I'm fine ... *shrug*< > >I'll write down the error message I get next time it happens.< Your system crashes during boot with the card inserted, and you get an error message? If you have to run ScanDisk (or if it runs automatically) on the next boot, it's likely a different problem than mine. When my L70 powers down booting with the combo modem in, it automatically wants to boot into Safe Mode on the next boot. After that, Windows boots fine with the modem out, and ScanDisk never finds any errors. I've nailed the problem down to a conflict between the hairy light bulb power saving driver and the modem drivers... but I really don't know where to go from there to try to resolve the problem. Matt _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
