Date: Sat, 02 Mar 2002 08:51:18
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Best VFM drive for my 50CT please?


>Date: Sat, 02 Mar 2002 08:12:56 +0000
>From: "Matthew Hanson" <[EMAIL PROTECTED]>
>Subject: Re: [LIB] Best VFM drive for my 50CT please?
>

>
>So is it possible that in the majority of cases where a Lib has gone belly
>up by installing a 9.5mm HDD, it was not because HDD spacers were removed
>and a 9.5mm drive installed per se, but because of some accidental physical
>damage done to the system in the process of installing the HDD?  I note 
>that
>you didn't say you found any damage done to a Lib that had a 9.5mm HDD
>carefully and properly installed Neil.
>
>Matt

[careful phrasing alert] I cannot comment on the way in which other people 
may have fitted the harddrives :) but I have never seen the main memory 
failed on a machine which has had the original drive never changed. I have 
had three machines which are working well all of which have had at least one 
- and for my current machine, probably one per week - hard disk change.

My feeling is that the risk involved in changing to a 9.5mm disk - provided 
the spacers are properly removed and normal care is taken - is probably less 
than the risk of tripping over the power cable and pulling the lib off a 
table.

Neil

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to