Date: Sat, 2 Mar 2002 14:19:52 -0500 (EST) From: Michael Miller <[EMAIL PROTECTED]> Subject: Fitting 9.5mm drives in L50-50 (was: Best VFM drive ...)
> [careful phrasing alert] I cannot comment on the way in which other people > may have fitted the harddrives :) but I have never seen the main memory > failed on a machine which has had the original drive never changed. I have > had three machines which are working well all of which have had at least one > - and for my current machine, probably one per week - hard disk change. May I advance another hypothesis? The "usual" instructions say "open up the Lib so you're sure to remove all the spacers ..." Having done that, I recall that the process of separating the case was rougher than I would have liked. Could it be that *this* part of the procedure can result in enough flexing of the motherboard to cause damage? Mike ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
