Date: Sun, 03 Mar 2002 19:49:08 +0000 From: T i m <[EMAIL PROTECTED]> Subject: Re: [LIB] OSR2 GPF?
Hi Phillip, Sri Mate, not done it yet .. some kind soul sent me a link to a pic of a 50 Device man screen but I couldn't open it? (Dan was it?) Why does it come up IS there a Midi controller in there? My main question is what should I do about the "PCMCIA Card Services" that's under the "Other Devices" section? All the best .. T i m phillip ramirez wrote: > Date: Sun, 3 Mar 2002 13:04:26 -0600 > From: "phillip ramirez" <[EMAIL PROTECTED]> > Subject: RE: [LIB] OSR2 GPF? > > That fix it? > > -----Original Message----- > From: T i m [mailto:[EMAIL PROTECTED]] > Sent: Saturday, March 02, 2002 1:21 AM > To: Libretto > Subject: Re: [LIB] OSR2 GPF? > > Date: Sat, 02 Mar 2002 07:16:29 +0000 > From: T i m <[EMAIL PROTECTED]> > Subject: Re: [LIB] OSR2 GPF? > > Cheers ~Phillip! > > phillip ramirez wrote: > > > Date: Fri, 1 Mar 2002 17:31:29 -0600 > > From: "phillip ramirez" <[EMAIL PROTECTED]> > > Subject: RE: [LIB] OSR2 GPF? > > > > Remove the mpu-401 in the profile.. > > > > That is the one that usually causes my problems on any of my computers > > > > -----Original Message----- > > From: T i m [mailto:[EMAIL PROTECTED]] > > Sent: Monday, February 25, 2002 1:01 PM > > To: Libretto > > Subject: Re: [LIB] OSR2 GPF? > > > > Date: Mon, 25 Feb 2002 18:55:59 +0000 > > From: T i m <[EMAIL PROTECTED]> > > Subject: Re: [LIB] OSR2 GPF? > > > > Hi Neil / All > > > > > >Hi Folks, > > > > > > > >Just a quickie .. > > > > > > > >Installed OSR2 on the 50CT and starts ok then > > > > > > > >Windows has caused a general protection fault (or similar) > > > > > > > >Ok in safe mode .. > > > > > > > > > > Tim, > > > > > > Tried booting in log mode, to see where it falls over? Also, if it's > > > > possible, remove the video drivers so it wakes up in vga 16 colour. > > > When you do the video, hunt around for ct65550. > > > > > > Neil > > > > [T] Update, came in tonight, removed the patrallel SCSI adapter and > > fdd and turned on and it came up ok! > > > > So, device man now has problems with . > > > > Network adapter (there isn't one though?) > > PCIC PCMCIA Controller > > Trantor T358 SCSI adapter (ok, I've unplugged it .!.) > > MPU-401 > > MS Windows SS > > > > What do I sort / load first please? > > > > All the best .. > > > > T i m > > > > > > > > _________________________________________________________________ > > > Chat with friends online, try MSN Messenger: > > > http://messenger.msn.com > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://libretto.basiclink.com/archive - Archives > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed > > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > > subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be addressed > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be addressed > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be addressed > to: [EMAIL PROTECTED] - Then replace any text on the message's > subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
