Date: Thu, 21 Mar 2002 20:58:26 EST From: [EMAIL PROTECTED] Subject: Cardbus & L100
Just installed a HP m820e external CDRW drive on my L100. The PCMCIA/SCSI card is switchable from 16-bit to Cardbus. It installed fine set to 16-bit, but set to Cardbus, it is unacknowledged by W98se. Using Toshiba's HWSetup in Control Panel to change the PC Card setting to Cardbus/16-bit from PCIC Compatible, then rebooting, W98 starts to load a PCI Cardbus Bridge, but then asks for a driver, "Toshiba ToPCI95 Cardbus Controller". To complicate things, at this point the PCMCIA slots are completely shut down, so accessing a CD is impossible. Does anyone know where this driver can be found, and the procedure for getting it installed, or should I just be happy with PCIC Compatible mode? I thought the L100 & 110 could do Cardbus. Thanks for any information. Lee ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
