Date: Thu, 21 Mar 2002 21:09:03 -0500 From: Pres Waterman <[EMAIL PROTECTED]> Subject: Re: [LIB] Cardbus & L100
> > Just installed a HP m820e external CDRW drive on my L100. The PCMCIA/SCSI > card is switchable from 16-bit to Cardbus. It installed fine set to 16-bit, > but set to Cardbus, it is unacknowledged by W98se. Using Toshiba's HWSetup > in Control Panel to change the PC Card setting to Cardbus/16-bit from PCIC > Compatible, then rebooting, W98 starts to load a PCI Cardbus Bridge, but then > asks for a driver, "Toshiba ToPCI95 Cardbus Controller". To complicate > things, at this point the PCMCIA slots are completely shut down, so accessing > a CD is impossible. > > Does anyone know where this driver can be found, and the procedure for > getting it installed, or should I just be happy with PCIC Compatible mode? I > thought the L100 & 110 could do Cardbus. Thanks for any information. You should have the drivers set up... and they can probably be found in c:\windows\system or where you have the win files on your HDD? You should have them ( the .CABS ) on your HDD for just this reason! Do it in PCIC mode then switch over and get the CardBUS stuff in! Thanks Pres Waterman, W2PW c/o 112 Motors, LLC Long Island Ford, Kia and Used Dealer GO BILLS! ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
