Date: Tue, 23 Apr 2002 14:55:01 +0000
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Errors


>Date: Tue, 23 Apr 2002 08:24:33 -0500
>From: "John Musielewicz" <[EMAIL PROTECTED]>
>Subject: Errors
>
>Hi Everyone
>
>My Libretto 70 has developed a problem. When I have the AC adapter 
>connected
>it will reboot with no notice and give me wierd errors under windows.
>Running on battery power gives me no problems. This all seems to have
>happened after the Libretto locked up so bad the reset button wouldn't work
>and I had to remove the battery and power supply to get it to reset.
>Everything else seems to work ok- it still charges and the brick will power
>it except for the above problems. So my question is- do you think I have a
>bad brick or could I have a problem with the mainboard power supply? A new
>brick is only 60 bucks but I don't want to spend the money if I don't have
>to. TIA

Are you able to get a scope onto the power output from the brick? Sounds 
like it could be noisy or at the wrong level (i.e. knackered).

You don't need to spend sixty bucks for a Tosh unit though, any regulated 
switchmode 15V/2A unit will do.

On the other hand, it could be nothing to do with the PSU - have you tried 
reseating the expansion RAM (under the keyboard left hand side)? 
Intermittent contact there gives exactly this symptom - leading to complete 
lockup. Try removing it completely (it'll run like a dog) and see if the 
problem goes away.

Neil

_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to