Date: Tue, 23 Apr 2002 09:31:32 -0500
From: "John Musielewicz" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Errors

> >Hi Everyone
> >
> >My Libretto 70 has developed a problem. When I have the AC adapter
> >connected
> >it will reboot with no notice and give me wierd errors under windows.
> >Running on battery power gives me no problems. This all seems to have
> >happened after the Libretto locked up so bad the reset button wouldn't
work
> >and I had to remove the battery and power supply to get it to reset.
> >Everything else seems to work ok- it still charges and the brick will
power
> >it except for the above problems. So my question is- do you think I have
a
> >bad brick or could I have a problem with the mainboard power supply? A
new
> >brick is only 60 bucks but I don't want to spend the money if I don't
have
> >to. TIA
>
> Are you able to get a scope onto the power output from the brick? Sounds
> like it could be noisy or at the wrong level (i.e. knackered).
>
> You don't need to spend sixty bucks for a Tosh unit though, any regulated
> switchmode 15V/2A unit will do.
>
> On the other hand, it could be nothing to do with the PSU - have you tried
> reseating the expansion RAM (under the keyboard left hand side)?
> Intermittent contact there gives exactly this symptom - leading to
complete
> lockup. Try removing it completely (it'll run like a dog) and see if the
> problem goes away.
>

Hi Neil

I can get a scope and scope the output without a problem I'll give it a try.
How does one get to the expansion ram? Lift the keyboard? How do you do
that? Thanks.

John




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to