Date: Sat, 27 Apr 2002 07:18:26 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] 50CT LCD
>From: "neil barnes" <[EMAIL PROTECTED]> > >o if you put disks wider than 8.5mm in a 50 case, you need to remove the >transparent and white spacers from the case back. What... some 70s have a wide enough to accept 9.5mm HDDs without modification? I had to remove those spacers on my L70 when I put this 20GB HDD in. >o There are instances where software which works on the 50 won't work on >the 70. We haven't been able to prove it, but it may be that the MMS >intructions on the 70 pentium are the cause. Well... I've tested, tested again, and then tested some more, and my L70 just won't boot with my Xircom combo modem inserted while it's drivers, and the Toshiba Power Saver drivers are installed. Put the same HDD in my L50, and no problems. And the L50's 6,4GB HDD/Win98 OS setup has no problems with this either. If I could find out what resources the Power Saver is using, I might be able to tweak the Xircom drivers to let the system boot with the modem inserted. It works fine inserting it AFTER boot. Matt Hanson (Shel) _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
