Date: Mon, 29 Apr 2002 00:23:17 -0500 From: [EMAIL PROTECTED] Subject: Re: [LIB] li-ion cells
Looks like its close enough to work. Doesn't matter if their shorter. Width wise I measured greater than 18mm in the 70's standard battery case. That's only a mm anyway which isn't squat. If a person has to they can probably sand down the case to make more room. Or just cram them in there. Just have to careful of the board which is in its own compartment anyway. Considering that its impossible to buy li-ion cells like nicad or nihm in the US this is a pretty rare find and probably won't happen again for a long time. I've been looking on and off for about a year. I'm going to stock up. They have a 5 year shelf life. And they are only charging 13 dollars a cell!!! And they'll be fresh!!! I hope they still have some in stock!!! I can think of a ton of stuff I'd like to use li-ion for!!! > I think that 18x64mm cells are wrong. L100 battery uses 17x67 cells. > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Sunday, April 28, 2002 8:41 PM > Subject: Re: [LIB] li-ion cells > > > > Date: Sun, 28 Apr 2002 19:41:33 -0500 > > From: [EMAIL PROTECTED] > > Subject: Re: [LIB] li-ion cells > > > > I was thinking of the standard battery and making it a 2 Ah cell. > > Here's a link to the company that makes them > > > > http://www.lgbattery.com/htm_body/products01.htm > > > > I would think the circuitry should be able to handle a 2000 Ah > > batterry since the methods of ending the charge are pretty generic. > > I'm trying to get info on what charging voltage the cells need to see > > if they'll work. Hmmm...interesting thought about using the > > extended battery and making it a 4 Ah. It sure would last a long > > time but it would also take a long time to charge. > > > > On 28 Apr 2002, at 17:21, Raymond wrote: > > > > > Date: Sun, 28 Apr 2002 17:20:17 -0700 > > > From: Raymond <[EMAIL PROTECTED]> > > > Subject: Re: [LIB] li-ion cells > > > > > > I dunno ... the LiIon cells they've got listed as suitable do seem a > little > > > pricey considering you'll need 6 of them ... on the flip side though, 6 > of them > > > will get you a 4AH pack (where your standard high capacity pack will > give you > > > 2.4AH) ... I wonder if the control electronics in the pack would freak > if you > > > put in 2AH cells ... > > > > > > > > > - Raymond > > > > > > > > > Quoting [EMAIL PROTECTED]: > > > > > > > Date: Sun, 28 Apr 2002 19:01:15 -0500 > > > > From: [EMAIL PROTECTED] > > > > Subject: li-ion cells > > > > > > > > Check out this link. Has li-ion cells for sale and located in > illinios. > > > > To good to be true. > > > > > > > > http://www.maxxprod.com/mpi-7.htm > > > > > > > > John > > > > > > > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://www.silverace.com/libretto/ - Archives > > > > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > on the message's subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > > > > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://www.silverace.com/libretto/ - Archives > > > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
