Date: Mon, 29 Apr 2002 20:12:15 -0400 From: "Gennadiy Tsygan" <[EMAIL PROTECTED]> Subject: Re: Re[2]: [LIB] li-ion cells
I tried to put Panasonic 18650 18x64 cells in the 2503 case and they did not fit, even with jackets removed.If anybody will have a better luck, let me know. I was wrong about 1500mah, 18x64 cells go as high as 1800mah, but if Panasonic still makes the exact same 17670 cells used in original 2503 batteries (and they do), I guess that there were no big advances in Li-Ion for the past three years. This a Panasonic page http://www.panasonic.com/industrial/battery/oem/chem/lithion/index.html > > > >I have not tried to put 18x64 mm cells in the battery because I only have 5 of > >them, but 17 mm seemed a tight fit. There is sticky tap in my battery, but it > >is not foamy and very thin. I will try to replace the cells just to see if > >they > >will fit. Also I am a little sceptical about 2000 mAh claim. Panasonic battery > >of the same size are rated 1500 mAh, and 17x67 mm Panasonics from L1x0 battery > >are rated 1250 mah > > As with many things, its not the physical size of the battery that matters > ... Just think about AA sized batteries ... not long ago, the best you > could get was 600mAh NiCADs ... then came 800mAh NiMH, 1AH NiMH, 1.4AH NiMH > and now 2.xAH NiMH AA cells which blow non-rechargeable Alkaline cells out > of the water (as anyone with a digital camera will realize!) ... > > Given that the original Libby packs were made several years ago, I could > quite believe they're up to 2000mAh 3 volts in a single LiIon cell. > > > - Raymond > > --- > > > /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ > | | "Does fuzzy logic tickle?" | > | ___ | "My HDD has no reverse. How do I backup?" | > | /__/ +-------------------------------------------| > | / \ a y b o t | [EMAIL PROTECTED] | > | | HTTP://www.raybot.net | > | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | > \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/ > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
