Date: Fri, 17 May 2002 22:04:40 +0800
From: Raymond <[EMAIL PROTECTED]>
Subject: Re: [LIB] Libretto 110 Bios upgrade

At 12:55 AM 17/05/2002 -0700, you wrote:
>Date: Fri, 17 May 2002 03:51:27 -0400
>From: "car val" <[EMAIL PROTECTED]>
>Subject: Re: [LIB] Libretto 110 Bios upgrade
>
>Hi  Raymond
>
>No, windows is ask me for the Y-E Data,
>do know were I can get it?? I don't have
>the Libretto recovery disk.

The floppy drive controller is, mostly, housed in a PCMCIA card made by Y-E 
Data (I say mostly because there are smarts in the laptop that are 
dedicated to the FDD and allow it to be used at boottime before the PCMCIA 
slots are actually enabled). That driver is available for download from the 
Toshiba website. I recommend that all the available drivers for the OS 
you're using be downloaded and installed ... certainly all the ones for 
Win9x for both the L50/70 and the L100/110 seem to fix more problems than 
they cause ... I can't speak for them under NT or 2k however as I'm not too 
familiar with them in those circumstances.


>But, I went into Bios and set the values to default,
>reboot and it worked :):):) upgrade done.

Probably tried to boot from the wrong place ... at least its worked now. 
When you did the flash, did you do the boot method or did you use the F12 
method?


>I decided to do the overlay with win98se, what overlay
>should I use? the HD is a toshiba. I have Max Blast by Maxtor.

I've not heard anything negative about EZ-Bios and it certainly seems in 
wider use than any other drive overlay (judging by the amount of support it 
has amongst other programs). Except, I *think* I heard somewhere that Max 
Blast is in fact EZ-Bios under a different name anyway ... can someone 
confirm or deny?


>What I'm going have a problem with is the Hibernation??
>what do I do first overlay or hibernation?

Umm ... like I said, hibernation is built into the BIOS.

Taking account of hibernation whilst using an overlay and with multiple 
operating systems has been discussed many times before, a browse through 
the archives should turn up more than enough information to satisfy your 
desire for knowledge on this subject. Make sure you follow threads to their 
conclusions to make sure you're getting the whole picture.


>BTW, were are you located, England???

Hehe you're WAAAAAYYYY off ... I'm in Western Australia ;-)


- Raymond

---


/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|                 | "Does fuzzy logic tickle?"                |
|   ___           | "My HDD has no reverse. How do I backup?" |
|  /__/           +-------------------------------------------|
| /  \ a y b o t  |          [EMAIL PROTECTED]             |
|                 |  Need help? Visit #Windows98 on DALNet!   |
| ICQ: 31756092   | Libretto IRC channel #Libretto on DALNet! |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to