Date: Fri, 17 May 2002 10:39:06 -0700 (PDT) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] Libretto 110 Bios upgrade
> I decided to do the overlay with win98se, what overlay > should I use? the HD is a toshiba. I have Max Blast by Maxtor. > > What I'm going have a problem with is the Hibernation?? > > what do I do first overlay or hibernation? I'd pickup the Western Digital 9.09W EZ-Drive 9.09W that installes EZ-BIOS overlay 9.06 at: http://160.87.24.223/ezdrv909.zip and install that first. I've used this one for months on my L110 with big HD and it works fine. Also, the most sensible and reliable one I've tried because it's just works, IMO. Use the manual install choice if you desire... -- For me, simply avoid the entire 1010-1040 cylinder section on the HD to avoid having the BIOS hibernation data being written to the 8.4GB area over your data. That means having two partitions for a big HD, but for me, I spent the time to walk the HD with WinHEX to locate the hibernation data on my HD after installing it new to make sure my data was safe. You can do the same test yourself to double check. 1) install EZ-BIOS, partition a small 1GB primary partition, install just Windows, WinHEX and any free HD space zeroing utility. 2) Open up Notepad, write in any unique text string you can search on later, eg "Libretto Rules!", and hibernate to disk. 3) Restore from hibernation, then use WinHex to search the entire HD for "Libretto Rules!". You can have it start at cylinder 1000 because on your HD, it will most likely be near the 8.4GB boundary as well. Scroll back and forth once you've found the text string to find out where the uppper and lower cylinder limits are, then add a few dozen more just to be safe. 4) Otherwise, simply avoid anything at the 8.4GB boundary and partition around the 1010-1040 cylinders like I did. ===== adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __________________________________________________ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
