Date: Wed, 29 May 2002 14:27:19 EDT
From: [EMAIL PROTECTED]
Subject: Re: [LIB] Need a battery for 100CT

In a message dated 5/29/02 7:54:54 AM Mountain Daylight Time, 
[EMAIL PROTECTED] writes:

> > > Also, has anyone done a rebuild on an old battery, i.e. put new cells 
in?
>  >If
>  > >  so, any recommndation on a source for the cells? Thanks
>  >
>  >Use the complete internals (including circuit board) of a PA2498U, the
>  >high-cap battery for the L50/70.  It is nearly a drop-in fit, and the 
> PA2498U
>  >is way cheaper than a new PA2503U.
>  
>  I thought the power connector for the L50/70 was about 1mm higher (or 
>  lower?) than that of the L100/110 ... I was looking at modifying a dying 
>  L50 pack to fit my L100 and I ran into an issue like that ...
>  
>  
>  - Raymond

Well, the packs I've modified have clicked nicely into place on my L100.  
There is some variation in technique - I relieve the cell "saddles" inside 
the case, while others have made it work w/o surgery - but I don't think the 
connector position has created a problem.  Maybe the connector on your L50 
battery is hanging up on the 2503 case lip and not seating fully?

Lee



**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to