Date: Thu, 30 May 2002 09:36:56 EDT
From: [EMAIL PROTECTED]
Subject: Re: [LIB] Need a battery for 100CT

In a message dated 5/30/02 7:20:49 AM Mountain Daylight Time, 
[EMAIL PROTECTED] writes:

> Great input, thanks. How do you get into the case withou breaking it? Is it 
>  glued to snapped together?

The PA2503s I've opened have had a lightly glued overlapping seam.  Try 
working a very thin-bladed spatula or automotive feeler gauge into one end of 
the case.  If you can separate an end seam, then carefully pull the case 
halves away from each other.  Prying at the seams usually just results in 
mangled plastic.

The PA2498s have a series of small clips holding the case halves together.  I 
never worry about damaging the PA2498 cases, but they have come apart much as 
the PA2503s, with very little to no damage.

Lee



**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to