Date: Sat, 31 Aug 2002 22:39:31 -0700 (PDT)
From: David Chien <[EMAIL PROTECTED]>
Subject: Re: [LIB] LCD Screen films - Need L20-L70 screen size! Is $5 okay? Rough or

* For me, the trick was to dirty a small edge of the test square of film.

Fingerprints did it for me.  Then, when applied, there was always a loose edge
to grab hold of.

  But be aware that if you do press down and properly adhere the film to the
screen, you'll have to take your time to gently, gently remove it.  Good
adhesive - strong but doesn't leave residue behind on removal.

* You do have to press (see my prior post with comments in the Libretto Mailing
List archives - several pages long re: installation) down on the film to rub
and adhere the adhesive properly.  Think Scotch invisible tape and what you
have to do to make the tape turn invisible on wrapping presents, and it's
basically the same thing.

  You will not see the full or proper effect of the film until this is done! 
until then, you'll only think it's the worst film on the planet, but after
you've rubbed it down, it turns the screen into a marvel.

* Be careful!!!!  There are no guarentees here because the pressure you apply
to the film to adhere it to the screen may break the LCD screen if you're not
careful or even by just bad luck. 

  IF you are NOT willing to risk destroying your Libretto, then do not apply
the $5 film.  it's not worth the risk.  For the rest of you risky types, then
apply gently with caution.  Use low pressure first and increase slowly as needed.

=====
adorable toshiba libretto
The latest news and information for the Toshiba Libretto owner.
http://www.silverace.com/libretto/

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com



**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to