Date: Fri, 06 Sep 2002 08:51:47 -0500 From: John Musielewicz <[EMAIL PROTECTED]> Subject: Libretto 100CT Cardbus controller
Hi gang I recently installed DOS Cardware pcmcia drivers. Cardware selected the contrller as a Toshiba ToPIC100. Is that the correct controller? The reason I ask is Win98 picked a Toshiba ToPIC97. However I did have some trouble setting up the controller in Win98. It tried to load a 16 bit generic driver too which messed it up a little. In DOS I have had no trouble except the card services driver claims my bios level APM desn't support card power management. Plus it gives me warnings on the PCI interrupt. Seems to work alright though- configures each card I put in just fine. John ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
