Date: Fri, 06 Sep 2002 22:40:17 -0500
From: John Musielewicz <[EMAIL PROTECTED]>
Subject: Re: [LIB] Libretto 100CT Cardbus controller

On Fri, 6 Sep 2002 15:04:41 -0700, you wrote:

>Date: Fri, 6 Sep 2002 14:59:32 -0700 (PDT)
>From: David Chien <[EMAIL PROTECTED]>
>Subject: Re: [LIB] Libretto 100CT Cardbus controller
>
>> I recently installed DOS Cardware pcmcia drivers. Cardware selected
>> the contrller as a Toshiba ToPIC100. Is that the correct controller?
>
>  If you're using an older version of Cardware, then whatever works works. 
>I've tried many older versions and all of them require a little something
>different to get the PCMCIA socket to work under DOS.  Esp. if you change from
>auto to cardbus/16-bit to pcic under the bios settings.
>
>  With the latest version and with UNATA noted in another recent post, the
>sockets load up right away without any manual fuss at all and they're really
>nice.  Recommended upgrade if you do a lot of DOS stuff and don't want to worry
>about the older drivers.

Hmmm...I have ver 6.12. It does work really nice except pcenable hangs
when I boot with a card in the slot. What's wrong with the ata
drivers? They handle 2 terabytes in size and only use a little of low
ram. I set them up in a batch file to load them when I use a card so
until I need them I won't use any. Do they not work with certain
cards?

>
>
>
>=====
>adorable toshiba libretto
>The latest news and information for the Toshiba Libretto owner.
>http://www.silverace.com/libretto/
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Finance - Get real-time stock quotes
>http://finance.yahoo.com
>
>
>
>**************************************************************
>http://libretto.basiclink.com - Libretto mailing list
>http://www.silverace.com/libretto/ - Archives
>
>                 -------TO UNSUBSCRIBE-------
>Reply to any of the list messages. The reply mail should be
>addressed to: [EMAIL PROTECTED] - Then replace any text
>on the message's subject line: cmd:unsubscribe
>              --------TO UNSUBSCRIBE DIGEST------
>Do above but with this on subject line: cmd:unsubscribe digest
>**************************************************************
>




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to