Date: Fri, 06 Sep 2002 23:31:04 +0800
From: Raymond <[EMAIL PROTECTED]>
Subject: Re: [LIB] 70CT + new 20g HD + linux strategy?

At 05:32 PM 5/09/2002 -0700, you wrote:
>Date: Fri, 6 Sep 2002 01:28:10 +0100
>From: "Alex Slater" <[EMAIL PROTECTED]>
>Subject: 70CT + new 20g HD + linux strategy?
>
>Hi all,

Hi Alex,


>I'm due to pick up a 70CT tomorrow and am looking for some advice on some OS
>installs and a HD upgrade.
>
>I've got  9.5mm 20gig drive sitting here, so my plan is to install the 20g
>drive and run win98 and some flavour of linux..

Sure ... I've got my L100 running Win95 and Red Hat Linux 6.2. It boots up 
in NTLDR which either loads Win98 or Lilo (which then loads either Win98, 
Linux or NTLDR ... you could imagine the boot loop when I accidentally had 
them booting each other ...). Prior to this I had an L50 which was happy 
booting Win95 and Red Hat Linux 6.2 the same way (in fact it was the same 
hard drive, I just wiped the 95 install and put 98 on it then restored the 
bootloader and let Linux detect the changes before tweaking the PCMCIA, 
networking and X settings).


>After trawling through the mailing list archives the "install linux" +
>"drives over 8gig"  combination seems to combine the worst of both worlds!
>It's very hard to build up a clear picture from the archives as there is so
>much information there.

My experiences on the L50 and L100 with a Fujitsu 20 gig drive are 
documented as follows. They are a lot to read and some of the points people 
will disagree on (you can read the arguments in the archives, some of them 
have a point so they are worth a read if you're worried) but all I know is 
they've worked not once, not twice, not three times but three and a HALF 
times on my L50 and L100 so I'm *pretty* sure at least they'll work, even 
if they may not be the best way of doing things (I think its the best way 
but then again there are many ways of doing things like this). I've never 
had to reinstall because of hard drive corruption if you don't count my 
experimentation phase which is the half I refer to above. For that matter, 
I've not had to reinstall at all really (apart from being fed up with Win95).

A 'diary' about getting things working (look also at the thread index for 
associated replies and updates from me)
http://www.technoir.nu/libretto/list/2002/msg00472.html

Getting Linux onto the laptop (including partitioning)
http://www.technoir.nu/libretto/list/2002/msg00753.html

... and I can't find my 'diary' on getting the L100 to work ... its there 
somewhere! Ah well it probably doesn't apply to you anyway with the L70.


>If anyone has any tips before I start I'd appreciate it.

Well most of what I can say is in those 2 (plus another 2 posts I remember 
making but can't find in the archives!) ... like I said, take what I say 
with a grain of salt but having a quick scan through, there isn't much if 
anything I'd do differently and things seem pretty stable (although I'm 
itching to put Win2k on there because I'm fed up with Win98's networking 
and how it really hates regularly getting switched from one network to 
another).


>Hardware wise I'll have :
>  The 70CT, 2 x  PCMCIA NICs (3com and a NE2000 clone), an enhanced port
>replicator, a desktop PC running win2k (with NIC), 2.5" to 3.5" HD
>converter, new 20g drive.

Drive converter will come in real handy ... read those posts though, I have 
a thing about how to NOT get yourself in trouble when moving the hard drive 
from the libby to the desktop. I can't remember if I mentioned it there but 
once you've got EZ-Bios loaded onto the hard drive, you *can* boot your 
desktop into 2k with the hard drive connected and you can copy stuff to the 
hard drive without causing problems AS LONG AS YOU DON'T MUCK AROUND WITH 
THE PARTITION TABLE!.


>The plan:
>  Stick new HD in Lib, boot off a Win98 boot disk format the visible drive
>into two FAT32 partitions.

Don't do this if you're going to use EZ-Bios (and I will STRONGLY recommend 
you use EZ-Bios, it makes recovery a LOT easier if things go pear shaped 
and it makes things consistent ... Windows will see the same partition 
table that Linux will see as Linux is fully aware of EZ-Bios and will deal 
with it nicely).


>I'm assuming here that the 20g drive will just show up as a 8.4g drive (due
>to the BIOS limitations). Will I have to leave space at the end for the
>hibernation dump or will that be done considering I'm using the Lib for the
>format?

See my thing about partitioning ... if you don't have partition magic, 
Linux FDISK works just as well (thats what I did with my L100 but I can't 
find the post I posted about it). Again make sure EZ-Bios is on there first.


>Stick the drive in the desktop PC, copy over win98 install set.
>
>Put drive back in Lib, install Win98. Set up networking to desktop.

Yup ... little trick (you probably already know this). Copy the install 
files to c:\windows\options\cabs (yes those directories don't exist on a 
blank drive, create them first). When you install Windows, it'll ask to 
install to c:\windows.000, change it back to c:\windows. That way later on 
when you do things like change driver settings, it won't ask you where the 
cabs are because it'll know (yes you could also hack the registry to change 
things later but I recon this way is more elegant ;-)


>Now what I'm hoping is that from here I can do a linux install into the
>remaining 11 or so gig on the drive (due to Linux ignoring the BIOS set-up
>for HDs??) ?
>
>Any chance I'll be able to do this by putting the Lib in the port
>replicator,  plugging in a network card and the floppy drive and doing some
>sort of network install  after booting from a linux floppy (back to my
>Desktop) of some flavour of Linux?

You could just plug the hard drive into the drive converter then plug the 
lot into your desktop. Set your desktop to boot off the CD (leave it empty 
first) then make SURE you boot the desktop off the libby's hard drive. Hold 
down CTRL to get the EZ-Bios screen then put your Linux CD into the CD-ROM 
drive then choose to boot off A drive. EZ-Bios then goes back and tells the 
BIOS to rescan its bootup sequence (so in fact it'll boot off the CD). Then 
install as normal (but don't install X, leave that for when the hard drive 
is back in the libby, ditto for things like networking and sound). I 
*think* I've gone through this in those posts above anyway. Either way its 
worked twice for me (and my desktop is an Athlon XP1600+ with a RAID array, 
SB Live, 3 video cards, network card and half a gig of RAM ... about as 
different from the Libby as you can get! Kudzu seemed to do a fine job of 
reconfiguring the install for the laptop though). Things like X, 
networking, FDD, PCMCIA, etc. you can leave until you put the hard drive 
back into the libby (make sure you copy all the source files over to the 
hard drive before you take it out of the desktop first though!).



Hope this helps!

- Raymond

---


/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|                 | "Does fuzzy logic tickle?"                |
|   ___           | "My HDD has no reverse. How do I backup?" |
|  /__/           +-------------------------------------------|
| /  \ a y b o t  |          [EMAIL PROTECTED]             |
|                 |  Need help? Visit #Windows98 on DALNet!   |
| ICQ: 31756092   | Libretto IRC channel #Libretto on DALNet! |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to