From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Valvoline SynPower Penetrating Lubricant
David,
I'm wondering just how much of this assembly you took apart once you got the top and bottom shield plates off. It would seem that I should at least unplug the ribbon from the laser head and pull the 2-3 screws than hold in down against one side of the mechanism. If this Valvboline penetrating spray has any solvents in it, I wouldn't think the ribbon would be happy to get any mist from a nearby shower... 8-/
Matt ... Happy that he's taken a good deal of the assembly apart to inspect and put it back together several times, and the darned thing still works!
From: David Chien <[EMAIL PROTECTED]>
The Valvoline stuff, even though it puts out an odor that takes forever to
dissipate, works fine in my HP m820e. Just used the straw, dropped a few drops
over the rails, moved the heads back and forth by the gears a few times to get
total coverage, and that was it. Working fine ever since.
_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
