Date: Fri, 29 Nov 2002 06:30:57 -0600 From: "John Musielewicz" <[EMAIL PROTECTED]> Subject: Re: [LIB] Not going into standby
----- Original Message ----- From: "Jan Novak [Tournesol^7thcube]" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Thursday, November 28, 2002 4:55 PM Subject: Re: [LIB] Not going into standby > Date: Thu, 28 Nov 2002 23:54:53 +0100 > From: "Jan Novak [Tournesol^7thcube]" <[EMAIL PROTECTED]> > Subject: Re: [LIB] Not going into standby > > From: "John Musielewicz" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Thursday, November 28, 2002 12:35 AM > Subject: [LIB] Not going into standby > > > > I just bought the Adaptec USB 2.0 pcmcia card. With the card inserted my > > Libretto 100CT will not go into standby. Anybody know why? > > Usually a bad/not finished/badly supported device driver will cause this > > Thanks. I'll try a differnt brand of card. > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
