From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] 100CT Overclocking ?
Xin just posted a few pix with red stripes and Xs though, and no text to explain much. Overclocking to 266 is pretty simple, as it's just a matter of shorting the two solder points on the far right of the 3 pairs of points in the picture. But the procedure to o/c to 233 involves a bit more, and the process does seem to differ from the info on one site to the next.
Matt
From: "Richard T. Waters" <[EMAIL PROTECTED]>
I would suggest you review:
http://www.fixup.net/tips/l100266.htm
"Ra�l L. Armesto" wrote:
> Date: Sat, 14 Dec 2002 00:07:49 -0300
>
> Hi Folks,
>
> I will try to overclock my libretto 100CT in this few days, I found 2 web
> pages describing the procedure of solding the circuit, but this procedures
> are diferent on this web pages.....
>
> 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm
>
> 2- http://www.silverace.com/libretto/L100oc.jpg
>
> If anyone did this before, PLEASE, Could you tell me in which web page is
> the RIGHT procedure ?
>
> THANKS A LOT.
>
> Leonardo
> Armesto.
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
