Date: Sun, 15 Dec 2002 15:21:31 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= <[EMAIL PROTECTED]> Subject: Re: [LIB] 100CT Overclocking ?
Hi again, Now I have my libretto overclocked to 266Mhz and with 32 MB of ram, I was wondering if I could install Windows XP in it. Could you help me with this dilema.? THANKS A LOT. PS: I read an article that says that if i modified 2 files of the windows xp CD ( txtsetup.sif "RequiredMemory=33030144" and dosnet.inf MinimumMemory=33030144") The install of windows XP will be succesfull... ----- Original Message ----- From: "Matthew Hanson" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Saturday, December 14, 2002 5:55 PM Subject: Re: [LIB] 100CT Overclocking ? > Date: Sat, 14 Dec 2002 20:51:54 +0000 > From: "Matthew Hanson" <[EMAIL PROTECTED]> > Subject: Re: [LIB] 100CT Overclocking ? > > Xin just posted a few pix with red stripes and Xs though, and no text to > explain much. Overclocking to 266 is pretty simple, as it's just a matter > of shorting the two solder points on the far right of the 3 pairs of points > in the picture. But the procedure to o/c to 233 involves a bit more, and > the process does seem to differ from the info on one site to the next. > > Matt > > > >From: "Richard T. Waters" <[EMAIL PROTECTED]> > > > >I would suggest you review: > > > >http://www.fixup.net/tips/l100266.htm > > > >"Ra�l L. Armesto" wrote: > > > > > Date: Sat, 14 Dec 2002 00:07:49 -0300 > > > > > > Hi Folks, > > > > > > I will try to overclock my libretto 100CT in this few days, I found 2 > >web > > > pages describing the procedure of solding the circuit, but this > >procedures > > > are diferent on this web pages..... > > > > > > 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm > > > > > > 2- http://www.silverace.com/libretto/L100oc.jpg > > > > > > If anyone did this before, PLEASE, Could you tell me in which web page > >is > > > the RIGHT procedure ? > > > > > > THANKS A LOT. > > > > > > Leonardo > > > Armesto. > > > _________________________________________________________________ > The new MSN 8: smart spam protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
