Date: Wed, 8 Jan 2003 17:10:27 -0500 From: "David" <[EMAIL PROTECTED]> Subject: Re: [LIB] Help with L100 Cardbus USB 2.0 card
Have you seen the speed requirement to support USB 2.0? I don't know what the minum mhz required for this card is, but my bet is the L100 is not close. Also most of these card want a large amount of ram to work with. A Cardbus slot is just a small part of supporting a USB 2.0 device. David Hettel ----- Original Message ----- From: "Lawrence Young" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Wednesday, January 08, 2003 4:56 PM Subject: Re: [LIB] Help with L100 Cardbus USB 2.0 card > Date: Wed, 8 Jan 2003 16:53:34 -0500 > From: "Lawrence Young" <[EMAIL PROTECTED]> > Subject: Re: [LIB] Help with L100 Cardbus USB 2.0 card > > But the USB port on port replicator is not USB 2.0. > > ----- Original Message ----- > From: "Lazar Krym" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Wednesday, January 08, 2003 12:30 PM > Subject: RE: [LIB] Help with L100 Cardbus USB 2.0 card > > > Date: Wed, 8 Jan 2003 15:27:14 -0200 > From: "Lazar Krym" <[EMAIL PROTECTED]> > Subject: RE: [LIB] Help with L100 Cardbus USB 2.0 card > > If you have the bigger port replicator, maibe it is worth to try those > small > cheap USB mini-hubs. I use one to duplicate the single USB port of my L110 > replicator. I've seen nice mini-hubs up to 4 ports with no power supply > requirement. The bigger ones require power supply. > > Lazar Krym > Brazil > > -----Original Message----- > From: Dion Forster [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, January 07, 2003 5:15 PM > To: Libretto > Subject: [LIB] Help with L100 Cardbus USB 2.0 card > > Date: Tue, 7 Jan 2003 22:12:55 +0200 > From: "Dion Forster" <[EMAIL PROTECTED]> > Subject: Help with L100 Cardbus USB 2.0 card > > Hi all, > > I noticed in a recent post that the L100CT can handle Cardbus? I > recently tried a Chronos PCMCIA Cardbus card with two USB 2.0 slots on > the side (these would be perfect to run my external CD re-writer and > connect my digital camera!) However, the card did not seem to be > detected on my L100CT running Win98 SE at all! However, when I inserted > it into my Sony Vaio PIII 700Mhz laptop (running XP (Xtra Problems...) > Professional) it picked it up right away and asked for the device > driver. In the Win98 Libretto it did not even register that a card was > inserted. > > Has anybody got any ideas? Is it the Lib 100, or is it a Win 98 > problem? I would love any help since I would love to use this card, it > is dirt cheap at R420 (South African Rand to dollar it is about 40 > dollars or so for the card). > > Thanks for any help. > > Regards, > > Dion > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.427 / Virus Database: 240 - Release Date: 12/6/02 > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
