Date: Fri, 17 Jan 2003 13:03:58 -0500 From: "Lawrence Young" <[EMAIL PROTECTED]> Subject: Re: [LIB] CF Wireless Card for Libretto 50??
To use wireless, you will need either one of the following: (1) a wireless router that shares internet and also acts as your LAN switch as well as wireless access point (2) a wireless access point that connect to your existing LAN (3) another wireless card in another computer so that both can connect in ad-hoc mode. Make sure all your wireless products are 802.11b standard compliant so they can talk to each other. There are also 802.11a and soon 802.11g products. ----- Original Message ----- From: "Matthew Hanson" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, January 17, 2003 12:58 PM Subject: Re: [LIB] CF Wireless Card for Libretto 50?? $14.99 ... Okay, now you guys have gotten my attention. What all is needed to go wireless besides the card? If the card broadcasts, what receives, and would the receiver be included with the wireless card? Will see if I can find this deal and check. I'm guessing that But.com was a typo for either Buy.com, or Butt.com. ;-P Matt _________________________________________________________________ MSN 8: advanced junk mail protection and 2 months FREE*. http://join.msn.com/?page=features/junkmail ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
