Date: Fri, 5 Mar 2004 14:40:12 -0800 (PST) From: David Chien <[EMAIL PROTECTED]> Subject: Re: How to remove "Front" [Was: Re: [LIB] AR Film Update]
> interested in seeing if Philip discovered any methods that might have been > easier for him while removing the mask (if he goes that route). Keep in mind that you can apply the AR film both ways -- seemlessly edge-to-edge by disassembling the Libretto LCD screen and applying the film so that it has no visible gaps when the bezel is replaced; or like me, simply cut the AR film very, very carefully to size, just barely smaller than the bezel itself, and apply directly to the screen w/o disassembly. The latter will give you a very small gap, but luckily, the LCD display area is smaller than the bezel by a few millimeters, so if you're careful, you can get the AR film to cover the entire LCD display area w/o any problems. Of course, keep in mind you do want this film to go on right the very first time around, so re-read my prior posts on how I put the film on, as well as posts from other members who applied this film, think it through, and go for it! Luck! =) Oh, and if you just want to test things out, you can snip a small strip off the AR film (leave enough to cover the entire screen later!!!!!), peel, and temporarily stick it to a portition of the screen to see what the difference before and after will look like. Don't press too hard since you'll need to peel it off anyways. ===== adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __________________________________ Do you Yahoo!? Yahoo! Search - Find what you’re looking for faster http://search.yahoo.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
