Date: Fri, 16 Apr 2004 00:36:24 -0500 (CDT) From: john <[EMAIL PROTECTED]> Subject: Re: [LIB] Would these work in our battery packs?
oh they'll fit but you'll need to tailor the pcm board to the cell. Otherwise you risk the danger of cell explosion. john [EMAIL PROTECTED] On Thu, 15 Apr 2004, Tom Stangl, VFAQman wrote: > Date: Thu, 15 Apr 2004 23:54:47 -0500 > From: "Tom Stangl, VFAQman" <[EMAIL PROTECTED]> > Subject: Would these work in our battery packs? > > http://batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=989 > > These might just squeak in, right? > > The problem, of course, is getting tabs welded on... > > Or see > http://batteryspace.com/index.asp?PageAction=VIEWCATS&Category=490 for > the 2400mAH, and the 50pack of the 2000mAH. > > -- > Tom Stangl > *http://www.vfaq.com/ > *DSM Visual FAQ home > *http://www.vfaq.net/ > *Prius Visual FAQ Home > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
