Date: Mon, 27 Jun 2005 08:14:17 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Glad I've found this list!
From: JaymeJ <[EMAIL PROTECTED]>
>A while back I found a thin 1/4" - 3/8" wide strip of
>plastic from a credit card is great for sliding thru
>the two case shells for the Libby battery packs to
>break the glue bond between them.
Did you then manage to renew the insides of the
battery cases and reuse them?
Or was that all you wanted to do, just open them?
I opened up an extended pattery pack for the 50/70 libs that was working,
and another for my 100/110 Libs (well, the MB is defunct at this point) that
was dead. That, so I could swap the guts of the 50/70 over to the 100/110
shell, and power the 100 with it. Innards are the same for both, but the
cases differ slightly.
I learned that from a bunch of listers who had gotten the 50/70 packs off
EBay for that purpose, as they're cheaper and more available than the
100/110 packs.
I never bothered to glue them together again, as when they snap into the
Libby, they're held together pretty well. If at some point I decide to try
using higher capacity cells to up the pack's power, I don't have to deal
with splitting the cases again.
Matt
Wanted: 110 motherboard or bare bones 110 system
Libretto list info:
Libretto list archive #1: http://www.technoir.nu/cgi-bin/libretto.cgi
Libretto list archive #2:
http://www.mail-archive.com/libretto@basiclink.com/
To unsubscribe: http://www.technoir.nu/libretto/list/2004/msg01419.html
